Cable Terminals and Connectors - Crimping tools, Crimping dies, connectors, cable lugs, hydraulic press, electrician's tools
SI_10 Insulation stripper
SI 10 Insulation stripper
Stripper for stripping and cutting:
- single-, multi-, and thin strand wires
- with plastic or rubber insulation
- wires cross section of 0,08 A– 10 mm2
- for flat cables of width up to 10 mm
- stripping length adjusted between 3 and 18 mm
- automatic blade force adjustment
- Cu and Al cable cutter up to 10 mm2 (single strand wires A up to 6 mm2)
- stripping blades automatically adjust to cable thickness
- exchangeable jaws and blades
- body made of fibreglass reinforced plastic
NOTE: do not use for steel wire
Length: 195 mm; Weight: 210 g 1 Piece
Stripper for stripping and cutting:
- single-, multi-, and thin strand wires
- with plastic or rubber insulation
- wires cross section of 0,08 A– 10 mm2
- for flat cables of width up to 10 mm
- stripping length adjusted between 3 and 18 mm
- automatic blade force adjustment
- Cu and Al cable cutter up to 10 mm2 (single strand wires A up to 6 mm2)
- stripping blades automatically adjust to cable thickness
- exchangeable jaws and blades
- body made of fibreglass reinforced plastic
NOTE: do not use for steel wire
Length: 195 mm; Weight: 210 g 1 Piece
₦61,768.32
In stock
SKU
ESSI10
Part No
SI_10
SI 10 Insulation stripper
Stripper for stripping and cutting:
- single-, multi-, and thin strand wires
- with plastic or rubber insulation
- wires cross section of 0,08 A– 10 mm2
- for flat cables of width up to 10 mm
- stripping length adjusted between 3 and 18 mm
- automatic blade force adjustment
- Cu and Al cable cutter up to 10 mm2 (single strand wires A up to 6 mm2)
- stripping blades automatically adjust to cable thickness
- exchangeable jaws and blades
- body made of fibreglass reinforced plastic
NOTE: do not use for steel wire
Length: 195 mm; Weight: 210 g 1 Piece
Stripper for stripping and cutting:
- single-, multi-, and thin strand wires
- with plastic or rubber insulation
- wires cross section of 0,08 A– 10 mm2
- for flat cables of width up to 10 mm
- stripping length adjusted between 3 and 18 mm
- automatic blade force adjustment
- Cu and Al cable cutter up to 10 mm2 (single strand wires A up to 6 mm2)
- stripping blades automatically adjust to cable thickness
- exchangeable jaws and blades
- body made of fibreglass reinforced plastic
NOTE: do not use for steel wire
Length: 195 mm; Weight: 210 g 1 Piece
| Manufacturer | ERKO |
|---|---|
| Part No | SI_10 |
Write Your Own Review