Subpanels can be mounted at nearly any depth in 25-mm
increments
Panels installed in the rearmost position in joined (ganged)
enclosures provide a continuous mounting surface without
requiring joining panels
Mounting hardware attaches to the top or to the sides of the
frame
Additional Mounting Hardware (catalog number PMKPF) is
available for applications requiring more support in the center
or bottom of the subpanel. This is required if the enclosure will
be tipped in transit or if the panel is not located at the bottom of
the enclosure on the glide blocks. In addition, 3-row grid straps
are required for installation unless the panel is in the rearmost
position. ADD.SIDE MOUNTG.HARDWARE(4X)
PROLINE subpanels are designed to provide maximum panel depth, panel size and ease of installation.
Full subpanels slide into the frame on nylon glide blocks, which support the entire weight of the subpanel.
All necessary mounting hardware is included.
Subpanels are 12 gauge (2.5-mm) steel (subpanels for doublebay enclosures 1400-mm tall or taller are 10 gauge steel), have flanges on all sides and are painted white
Conductive subpanels are unpainted galvanized steel. Available for applications requiring more support in the center or bottom of a ProLine subpanel.
This is required if the enclosure will be tipped in transit or if the panel is not located at the bottom of the enclosure on the glide blocks.
Additional Side Mounting Hardware for ProLine Subpanel.
